We wanted to help YOU celebrate Halloween with 10% off ANY of our 2005 - 2015 Tacoma FRONT or REAR bumpers! This is no trick, just a special treat to you from us!
Offer starts 10/24/16 and is valid through November 7th. Use code BRAINS at checkout!
Offer valid on new orders only from 10/24/16-11/7/16. Use your brain before it's gone! Zombie season is upon us. Get protected now!
We are running a special sale for all our first gen (96-04) Tacoma lovers out there. Starting NOW through the 14th of October save $75 off our standard rear bumper or wrap around plate bumper and $100 off any of our front bumpers for the 96-04 Tacoma's. Buy one or buy them all!
Use code SAVEME75 at checkout for the rear bumpers.
Use code SAVEME100 for the fronts!
Sales like this don't come around often so be sure to grab yours while you can.
As many of you may know we have struggled in the past with lengthy lead times for all our bumpers.
We want to let everyone know we appreciate all your patience with us as we have implemented HUGE changes in our NEW shop to cut our old 6 month lead time in HALF! *Jumps for joy*
To all our past and current customers, future customers while we are at it... you guys all mean the world to us! It is hard to even express in words how much we appreciate everyone sticking by our side through thick and thin. Through everything, even though lead times were long our quality has never stopped impressing.
Our current lead time on all new bumper orders is 10-15 weeks. Again this is HALF of what our past lead times have been.
Some things that have made this possible for us have been moving into a much larger shop. By much larger I mean over twice the size! It took a hot minute to get everything up and running again, but boy are we running now! Better and more efficient than ever with the help of our hardworking new staff members. None of this would be possible without them.
We also were able to get our hands on some handy new tools allowing us to make everything IN HOUSE! That's right, we make everything right here in our Sparks, NV shop. Don't believe me? Stop by and take a look for yourself!
I am also happy to say that with our quick new turn around times quality has not been sacrificed. All our products are over seen by the "boss", Eric. NOTHING goes out our doors subpar. Every bumper is put through strict quality control to make sure not one is lesser than the other.
With that said, who's ready to place their next order?
Check out some of our favorite work below:
Starting today, August 26th here at Relentless Fabrication we will be running our annual 15% off Labor Day sale. This sale is our way of giving back to all you hard workers out there. Reward yourself with some new armor, there is no better way to protect your investment.
Simply use the code FALL15 at checkout and the discount will automatically be taken off all qualifying items.
Sale excludes all recovery gear, all LED lighting other than Rampage LED, and all roof racks. Discount is taken off the product cost and does not include shipping. Discount cannot be combined with any other offers.
Discount code will be good through Labor Day, September 5th. It is not valid on any current orders or orders placed after September 5th.
The Relentless team has been hard at work the last couple months cranking out some fresh new designs for YOU to enjoy. One of our biggest accomplishments this month was getting out our brand new line of 2016 Tacoma front bumpers.
With more and more bumpers on the market you may ask yourself why should I go Relentless? The name may speak for itself, but here are some other key facts about our bumpers.
Made from CNC cut steel, CNC press brake formed and precision MIG welded together by skilled fabricators.
Bumper offers far greater approach angles, wheel well clearance and overall strength compared to factory components all while giving an aggressive clean look. Every bumper includes standard winch mounting area and solid recovery points, and includes necessary grade-8 hardware and mounting brace plates to increase the strength of factory mounting plates.
Steel bumpers are made entirely from 3/16" steel with solid 3/4" thick recovery points.
Steel bumper approximate weight is 140lbs.
-Standard winch mounting plate for winches up to 10k
-Standard 3/4" steel integrated recovery points
-Standard frame bracing plates for heavy recovery and winching
- Requires cutting factory bumper cover and fender flares
- No Modifications to factory grill needed
Compare us to the competition and you'll see we offer more standard equipment for the money!
All bumpers are proudly main in our Sparks, NV shop, no out sourcing here! Each bumper is custom built to YOUR specific order, these are not mass produced. Each bumper is personally worked on and overseen by the Owner/Fabricator before being shipped out to its new home.
Thank you everyone for the support,
-The Relentless Team
This past weekend we had the pleasure of finally getting our hands on a 5th generation 4Runner to design a front bumper unlike any others!
In the process we were able to make a new friend, Ruston from Overlanding USA. If you haven't heard of him I recommend checking out his website www.overlandingusa.com and his Instagram OverlandingUSA. He let us borrow his 4Runner for the weekend while we got designing on the new front bumper!
Take a look at some of the photos below from the design process.
When designing any bumper we want to make sure it actually fits the vehicle, and not just from a mounting stand point. It has to look like it belongs on the vehicle. We pride ourselves on top not design quality and aesthetics. Our bumpers are precisely measured to ensure we make the most of the vehicles natural body lines and help enhance them anyway we can with our bumper design and tubing.
While in the midst of designing the bumper we were also able to make a hood hinge ditch light bracket similar to our best selling brackets for the 05-15 Tacoma. Do you go off-roading? Maybe you do some overlanding? Or just some mild camping. These mounts are made for you! Light your path or campsite with your favorite Rigid lights using these mounts. With easy installation you can't go wrong.
Looking for more information on these brackets? Check them out HERE
Until next time,
The Relentless Fam
It has been a crazy month at the Relentless headquarters. We had lots of different projects going on in the middle of busting out orders from our epic Thanksgiving sale.
Our most recent and exciting project of them all has to be our brand new design for the 5th generation 4Runner rear. Our customer went all out with his requesting dual swing outs for his tire and jerry cans. Take a look at some of the photos below! We hope you enjoy it as much as we do.
Next on our list was an install for a first generation front summit bumper, wrap around rear bumper, and some custom light bar mounts.
Last but not least was our beast of a Chevy bumper which happens to be one of our favorite bumper designs of yet. Decked out with Rigid Dually XL's and Rigid DOT fogs side by side for some major light output.
Our goal this coming year is to bust out those bumper orders for our extremely patient customers.
For more updates going on around the shop be sure to follow us on Instagram @relentlessfabrication.
If you've been on our site before I'm sure you immediately noticed the vast changes in appearance. We hope you like them!
Our new site should look much more polished, more detailed, and better depict stock-status/Availability of our items. All of this has been done to better serve our customers!
The main navigation bar at the top should list off all relevant pages including familiar pages like an 'About us' 'Contact' and 'Policies' page. Our previous Online store link has now been called 'Product Catalog', and you'll also find a few other nifty pages... One we hope is a very helpful one- 'Track your order'. This page allows customers to enter an order number (you'll get one in your email order confirmation) and the email address associated with your order to show the current status of your order. It will let your know that we've received, processed, or shipped an order. Plus once it has shipped it'll automatically list tracking results on trackable orders (sorry, still no tracking on freight shipments). *please note that if you ordered on our old site the new order tracker will not work for your order, sorry!
In addition to the 'Track your order' page you'll find a social media page that features our Instagram feed which will allow you to see what we've been posting. We often post photos of projects around the shop, as well as our adventures and reposts of our customer images showing our products in use.
In addition to our website revamp, we'd also like to celebrate with starting our annual Thanksgiving sale a few days early! Thats right, if you're reading this you can enter code 'THANKSGIVING' at checkout to save 20% on all Relentless built products through 11:59PM on Black Friday (11:59 PM on 11/27/2015). Sorry, the discount does not apply to recovery gear or Rigid Industries, or Piaa lights. It does however include all in-stock Rampage LED products! What are you waiting for, go save some dough and get those truck parts you've been wanting all year!!
Thanks for visiting!
-The Relentless Fab Crew